dimensions in inches and (millimeters) db dbs .404(10.3) .386(9.80) .255(6.5) .245(6.2) .013(0.33) .0088(0.22) .013(0.33) .003(0.076) .060(1.53) .040(1.02) .205(5.2) .195(5.0) .047(1.20) .040(1.02) .335(8.51) .320(8.13) 0 45 .130(3.30) .120(3.05) features glass passivated junction ideal for printed circuit board reliable low cost construction utilizing molded plastic technique high temperature soldering guaranteed: 260 o c / 10 seconds / 0.375? ( 9.5mm ) lead length at 5 lbs., ( 2.3 kg ) tension small size, simple installation high surge current capability maximum ratings and electrical characteristics rating at 25 o c ambient temperature unless otherwise specified. single phase, half wave, 60 hz, resistive or inductive load. for capacitive load, derate current by 20% db 101g db 102g db 103g db 104g db 105g db 106g db 107g type number symbol dbs 101g dbs 102g dbs 103g dbs 104g dbs 105g dbs 106g dbs 107g units maximum recurrent peak reverse voltage v rrm 50 100 200 400 600 800 1000 v maximum rms voltage v rms 35 70 140 280 420 560 700 v maximum dc blocking voltage v dc 50 100 200 400 600 800 1000 v maximum average forward rectified current @t a = 40 o c i (av) 1.0 a peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load (jedec method ) i fsm 50 a maximum instantaneous forward voltage @ 1.0a v f 1.1 v maximum dc reverse current @ t a =25 o c at rated dc blocking voltage @ t a =125 o c i r 10 500 ua ua typical thermal resistance ( note 1 ) r ja r jl 40 15 o c/w operating temperature range t j -55 to +150 o c storage temperature range t stg -55 to +150 o c notes: 1. thermal resistance from junction to amb ient and from junction to lead mounted on p.c.b. with 0.2? x 0.2? (5mm x 5mm) copper pads. 2. dbs for surface mount package. db(s)101g - db(s)107g single phase 1.0 amp. glass passivated bridge rectifiers http://www.luguang.cn mail:lge@luguang.cn
ratings and characteristic curves (db(s)101g thru db(s)107g) fig.2- typical reverse characteristics per bridge element 0 20 40 60 80 100 120 140 100 0.01 0.1 1 10 percent of rated peak reverse voltage. (%) tj=125 c 0 tj=25 c 0 fig.5- typical forward characteristics per bridge element instantaneous forward current. (a) 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0.01 0.1 1 10 forward voltage. (v) fig.4- typical junction capacitance per bridge element capacitance.(pf) 1 10 100 1 10 100 reverse voltage. (v) tj=25 c f=1.0mhz vsig=50mvp-p 0 fig.1- maximum derating curve for output rectified current average forward current. (a) 20 40 60 80 100 120 140 150 0 0.5 1.0 ambient temperature. ( c) o 60hz resistive or inductive load instantaneous reverse current .( a) tj=25 c pulse width-300 s 2% duty cycle 0 fig.3- maximum non-repetitive peak forward surge current peak forward surge current. (a) 1 2 4 6 10 20 100 6040 0 10 40 60 50 20 30 number of cycles at 60hz single sine - wave (jedec method) copper pauls .51" x .51" (13mm x 13mm) .06" (1.5mm) pcb db (s)1 0 1g - db (s)1 0 7 g single phase 1 .0 amp. glass passivated bridge rectifiers http://www.luguang.cn mail:lge@luguang.cn
|
